What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 21.06.2025 10:41

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
These devices are installed between the “hot” and “neutral” and protective ground.
Is the Democrat party connected with organized crime in America?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
But it can get overloaded, and no longer works.
What was the worst spanking you got growing up?
[old diagram got deleted by accident]
Barnstars:
Edit 2024–10.
In schematic diagrams this is the symbol for a fuse:
what exactly is a ‘surge’ protector?
But… the neutral is now “floating” because of the 1 ohm resistance.
Do flat Earthers really exist? Why do they believe the Earth is flat?
the problem then depends on "how fast does the fuse operate?".
A fuse is a non-resetable over current circuit protector.
It also is a device that limits the change in current flow.
This is 'the assistant's answer'
The bolt then partially travels down the line to your home.
a photo is worth a thousand words.
How can one learn to talk frankly?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
so, what happens?
He then describes the function of a fuse.
Beyond The Hype: What Apple's AI Warning Means For Business Leaders - Forbes
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
The third is lightning and “how it gets conducted into a home.”
An AC voltage/ current source, and an ac inductive load.
What is the most inappropriate experience you have had with a friend's daughter?
[image of Common-mode choke]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
What movies and TV shows portray realistic beauty standards?
What does a fuse do?
There are two important concepts here.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
First Sentence:
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
(Dc diagram shown, AC is similar).
Upvotes:
A circuit breaker is similar, but is resettable.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
It seems Mohan does not understand the difference between a comment and an Answer.
The other is “what does a “fuse” do?”
One
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
These are simplified answers to the original question, and does not change anything I wrote above.
One is “what exactly is in a ‘surge protector’ ? ”
He then describes Rainy Season and Lightning.
Because the load is inductive, the current lags the voltage.(by a bit).
This device then solves the entire problem.
eight
What is lightning?
2024–10–16 [ OO OLAOYE OYEBODE ]
For this case there are devices called Metal oxide varistors (MOV).
Here is a simplified AC power diagram.
2024–10–10[John johnson John Johnson ]
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
He then asserts :
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
So, the voltage could go up to 500 volts, and the fuse will not open up.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
but I think this circuit , shows a few more pieces.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
There are three different concepts here that are getting confused.
2024–10–14 [Omar Gharbi Omar Gharbi ]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This is where this question deviates from being a 'generic' question, and becomes more specific.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
At least they know the answer if they wanted it.
This one hit behind the barn.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
nine
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This is where the MOV conducts again, and dissipated the energy.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
but this device (an Inductor) … impedes the rapid changes in the current.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
At one ohm, the resistor has a maximum of 1 watt power.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Now when you have a certain ac resistance, then a current flows in a loop.
I post the exact comment here.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.